In Soviet Russia, DIY Laser Rangefinder Scan YOU!!

Yakov Smirnoff used to say, “In America, you can always find a party. In Soviet Russia, Party finds YOU!!” Only here, it’s a laser rangefinder.

In this project (automatic translation), [iliasam] makes his own scanning laser rangefinder, like the ones that we’ve seen in fancy vacuum cleaners. But he does it from scratch.

b91e3927436e885627e52179a5ed6c70While this sort of thing is easy if you have a webcam and a ton of processing power to throw at it, [iliasam] takes the hard way out — measuring the parallax of the reflected spot through a lens on a linear image sensor (which renders as “photodetector line” in translated Russian).

Linear image sensors are a lot like the elements in your CMOS digital camera, with the exception that the elements are arranged in a line instead of a plane, and they’re a lot easier to interface with a microcontroller. Hold a data line high to take an exposure, and then clock out the (analog) voltage values that correspond to the amount of light that hit each cell in the line array. While [iliasam] paid an estimated $18 for his, we’ve found them much cheaper on eBay. And there’s usually a linear sensor, often RGB and complete with driver circuitry, in a scanner if you take one apart. This could be done for just a few bucks if you were thrifty.

The rest of the build consists of some signal conditioning and (very nicely done) hardware construction. [iliasam] mounted the scanner on top of a Roomba and set it off to explore his apartment. The results are quite professional, which you can see for yourself in the videos below.

We’ve covered the commercial version of this same device that can be found in Neato vacuums. But building one from scratch takes the game to another level.